How Do You Fix an Android Phone/ tablet That Won’t Turn On? (Explained)

How Do You Fix an Android Phone/ tablet That Won't Turn On? (Explained)

Here is How to fix an Android Phone or tablet That Won’t Turn On in an easy steps. Every smartphone and tablet owner’s biggest nightmare is trying to turn on their device and discovering that nothing happens. Your phone is not turning on. A blank screen with no indication of life means tragedy.

What are the possible causes of your Android phone or tablet not turning on? Let’s look at some of the causes and solutions.

How do you fix an Android Phone or tablet That Won’t Turn On?

  1. Check the Charging status First
  2. Examine Your Connections
  3. Clean the Dust and dirt
  4. Troubleshoot Your Cable System
  5. Run a Power Cycle
  6. Examine Your Battery
  7. Check to see if the battery is receiving power.
  8. Examine the Screen
  9. Troubleshoot Using Your Computer
  10. Reset Your Android Device

     

1. Check the Charging status first

Check the Charging status first. As is often the case, the most obvious cause is almost always the correct one.

If you haven’t seen any previous signs of your phone failing, the issue could be as simple as a shortage of charge in the battery. Most of the time, this is due to billing concerns.

2. Examine Your Connections

First, go over the obvious points. Did you make a point of charging your phone? Is the charger partially detached from the wall socket? Is the power supply turned on?

3. Clean the Dust and dirt

Next, make sure there’s no dust, debris, or other muck clogging up the USB port on your charging cord or the charging port on your phone.

Keep in mind that the connections are fragile. A can of compressed air is the finest technique to clear grime from ports.

How Do You Fix an Android Phone/ tablet That Won't Turn On? (Explained)
How Do You Fix an Android Phone/ tablet That Won’t Turn On? (Explained)

4. Troubleshoot Your Cable System

USB charging cords are notorious for spontaneously failing. You can test your cable’s integrity by connecting it to another device and checking if it works.

5. Run a Power Cycle

We’ve all had our phonesfreeze. None of the buttons work, and the screen is unresponsive. But did you know that a phone can also freeze in its powered-off state?

If your Android phone won’t switch on, one remedy is to complete a power cycle. For older devices with removable batteries, simply remove the battery, wait a few seconds, and replace it.

Press and hold the device’s power button for several seconds on more recent handsets that do not have a detachable battery.

Depending on the manufacturer, you may need to hold it down for anywhere from 10 to 30 seconds.

6. Examine Your Battery

If your phone has died and won’t turn on or charge, but you’re positive that your charging equipment is working and a power cycle hasn’t fixed the problem, it’s time to look into your phone’s battery. It could be the cause of your phone not turning on.

Most phone and tablet batteries begin to degrade fast after a few years of use. They will eventually pass away. Other sorts of damage can also permanently destroy the battery.

A battery can be rendered inoperable by liquids, falls onto hard surfaces, and severe temperatures.

https://www.youtube.com/watch?v=F_RXbspnSMI

7. Check to see if the battery is receiving power.

Wait one minute after plugging your phone or tablet into the charger to see if the battery icon appears on your screen.

If it does, your battery is in good condition, and you can go to the next stage. You may also notice a small red (or another color) light flashing.

If you do, it signifies your battery is insufficiently charged to switch on or display any material on the screen. Allow it to charge for 30 minutes before attempting again.

Is there no battery icon or light? That could signal your battery is dead and needs to be replaced.

If your phone has a replaceable battery, you may get a new one .

If your phone does not have a removable battery, you must either disassemble it and change the battery yourself or take it to a specialist shop.

Note:

You should be aware that attempting to change the battery yourself may void the device’s warranty.

8. Examine the Screen

Of course, your phone could be turned on without your knowledge. A broken screen can give the appearance that no power is present.

Fortunately, determining whether your screen is to blame is simple. Hold the Power button for 30 seconds to verify that your phone is fully charged, then wait at least two minutes for the startup process to complete.

Simply dial your number from another phone. Your screen is to blame if your phone rings. If it does not, you must continue.

Remember that while you can sometimes replace the screen yourself, you will forfeit your warranty.

9. Troubleshoot Using Your Computer

If your device still won’t boot, you might be able to force it to turn on using your computer. You can work through a fairly confusing series of instructions provided by Google. We’ve broken them down below:

  1. Using a USB cord, connect your phone to your computer.
  2. Allow it to charge for 15 minutes.
  3. Remove the cable from your device (not the computer).
  4. Within 10 seconds of unplugging the cable, reconnect it.
  5. Charge your device for an additional 30 minutes.
  6. Hold down the Power button for five seconds.
  7. On your screen, tap Restart.
  8. Hold the power button for another 30 seconds if you don’t see Restart.

10. Reset Your Android Device

Your device may power on but fail to get through the boot process to your home screen. It’s possible that a corrupted upgrade or a custom ROM is to blame. You might try to reset your smartphone in this instance.

Warning: Resetting your phone or tablet will erase all data on it. Make careful to back up your crucial Android data regularly.

Follow the instructions below to reset your Android phone using Recovery Mode:

  1. Hold down the Power and Volume Down buttons for a few seconds until you see the Android logo on the screen. (Some manufacturers use a different key combination.)
  2. To enter Recovery Mode, press the Volume Up and Volume Down keys simultaneously.
  3. Press and hold the Power button.
  4. Select Wipe Data/Factory Reset with the Volume keys, then click the Power button.
  5. Finally, choose Yes Erase All Data and push the Power button.

Note:

It might take several minutes to finish the reset process.

Final thought

If nothing else works, it’s time to confront the fact that you need a new phone.

Keep in mind that certain phones are specifically built for use in dirty or rough environments. If you frequently face clogged ports, one of these gadgets may be the best option.

Related Article:

Is The Android More Secure Than iPhones? (Explained)

 

Leave a Reply

Your email address will not be published. Required fields are marked *